A line of 11 bodymakers is installed on three un-isolated monolithic foundations. The neighbouring building, located about 40 meters away from the machines, was complaining about excessive vibrations being transmitted to their premises.
Addressing excessive vibrations being transmitted to building neighbouring Can Manufacturer
Poland
Project Overview
The Challenge
Farrat were called to carry out a vibration investigation to assess the situation and present potential mitigation solutions.
Measurements were taken on and off the foundations in the factory to determine the degree of isolation provided by the inertia blocks, and outside, between the plant and neighboring building to measure vibration propagation to the surroundings.
The Results
Full transmission from foundation to factory floor
Related Projects
Industrial / Manufacturing Reducing Cupper Press Movement with Farrat Isomat System
Industrial Vibration Control
Industrial / Manufacturing Eliminating Cupper Press Vibrations at Stamping Press OEM
Industrial Vibration Control
Industrial / Manufacturing Vibration Inspection Enhances Quality at Manufacturer in Greece
Industrial Vibration Control
Industrial / Manufacturing Ensuring Safety and Compliance – PAT Testing for a UK Manufacturer
Farrat was asked to perform Pre-Acceptance Test (PAT) on a new piece of machinery.
Commercial Paddington Square London, UK
In this magnificent building designed by Renzo Plano, TBF was used to thermally decouple the façade,...
Commercial Valpraxis, Geneva, Switzerland
TBK was used to thermally insulate the façade from the reinforced concrete frame of the building. A high...
Challenge our engineers
Contact us now for an initial consultation.