Spheriseats can be supplied bonded on top of the Precision Levelling Elements units to take up complex angles (from floor irregularities etc) between the floor and the machine.
This is important to ensure a full, secure seating and to relieve any stresses which could build up in the machine base.
Note: Alternate dimensions of D3 and D4 can be made to order. Request a quotation below for more information.
| Part Ref | D1 (mm) | D2 (mm) | D3 (mm) | D4 (mm) | H (mm) |
|---|---|---|---|---|---|
| 1SPS080 | 80 | 80 | 49 | 58 | 18 |
| 1SPS110 | 110 | 110 | 70 | 81 | 24 |
| 1SPS150 | 150 | 150 | 80 | 95 | 30 |
Screw Assemblies are offered as an option for the Bolt-On Wedgemount. Material: Zinc plated mild steel.
Note: Alternative screw lengths available on request.
| Part Ref | M (thread) | S (mm) | H (mm) | L (mm) |
|---|---|---|---|---|
| 1SN1210 | M12 | 8 | 10 | 100 |
| 1SN1610 | M16 | 11 | 10 | 100 |
| 1SN2010 | M20 | 13 | 10 | 100 |
Anti-vibration Washers are required for Bolt-Through Wedgemounts with damping pads to prevent the vibration bridging through the holding down bolt.
| Part Ref | Bolt D (mm) | D1 (mm) | D2 (mm) | H (mm) | Max torque(Nm) | Max bolttension (kN) | Max deflection(mm) |
|---|---|---|---|---|---|---|---|
| 1AWR12 | 12 | 40 | 13 | 11 | 20 | 8.3 | 0.9 |
| 1AWR16 | 16 | 50 | 17 | 16 | 30 | 9.4 | 1.5 |
| 1AWR20 | 20 | 61 | 21 | 16 | 44 | 11 | 1.5 |
| 1AWR24 | 24 | 65 | 25 | 18 | 54 | 11.2 | 1.5 |
Contact us now for an initial consultation.
